Skip to content
Proudly designed & made in Europe 🇪🇺
Free shipping on orders over €85
Printed to order
Cart

Wrap, foil & bag drawer organiser — ends the tangle

Long boxes, rolls, and bags can be awkward to organise in one drawer. Modu Drawer's modular grid lets you plan separate sections around the drawer's internal measurements and the packages you use.

The wrap-foil-bag drawer problem

Cling film, foil, parchment, sandwich bags, and freezer bags come in different package shapes. When they share one open drawer, smaller packets can move behind longer boxes and frequently used items can become harder to reach.

Start by measuring the drawer and the boxes or packets you want to store. A useful layout depends on both sets of dimensions.

Why fixed organisers may not suit long boxes

Fixed organisers use pre-set compartments. A compartment designed for cutlery or small utensils may not suit a long box, so compare the package dimensions with the organiser's current product details.

Bag boxes and loose packets also vary in size and opening style. Choose an orientation that follows the packaging guidance and fits the measured drawer.

If one fixed tray does not suit the mix, a modular layout can allocate separate sections without assuming universal package sizes.

How a modular grid can separate categories

Modu Drawer's grid base is sized around the drawer's internal length and width. Modules slot, snap, and slide into the grid and can be rearranged as your storage needs change.

  • Measure long boxes. Compare each box with the current module specifications and the drawer's internal dimensions.
  • Measure bag packets. Include the packet or container you actually store, rather than assuming a standard size.

Modules are 3D-printed on demand in Europe from food-safe, recycle-conscious, plant-derived PLA bioplastic.

Long utensil drawer organiser module — 9×3 grid, 265.5×88.5mm, food-safe PLA bioplastic

Long tray organiser – 9x3 (265.5 × 88.5 mm)

€9,50
Small utensil drawer organiser module — 6×2 grid, 177×59mm, food-safe PLA bioplastic

Slim tray organiser – 6x2 (177 × 59 mm)

€5,50
Small tools and essentials drawer organiser module — 4×3 grid, 118×88.5mm, food-safe PLA

Small tray organiser – 4x3 (118 × 88.5 mm)

€5,50
Browse all kitchen →

Three ways to plan a wrap, foil, and bag drawer

Prioritise the essentials

Start with the boxes and packets you use most often, then use the drawer builder to compare compact arrangements.

Separate more categories

If you want distinct sections for several wraps or bags, measure every package and check which modules fit together.

Allow for small accessories

If clips or other accessories also belong in the drawer, include them in the plan and confirm module suitability in the current product details.

Use the drawer builder to test a layout from the drawer's internal measurements.

Sizing — check every axis

Check the drawer width

Width helps determine which module arrangements fit across the drawer, but it does not establish whether a long box will fit.

Check the drawer length

Measure the longest package and compare it with the drawer's internal length and the current module specifications.

Check the available vertical height

Confirm that the drawer closes with the stored packages and chosen modules in place.

The drawer builder uses the drawer's internal length and width to show which modules fit.

Care — wipe-clean

Wipe-clean: lift any module out, wipe with a damp cloth, slide it back. Avoid soaking and hot liquids.

FAQs

How do you keep cling film, foil, and bags organised?

Measure the boxes and packets you use, then compare separate modular sections in the drawer builder. The best arrangement depends on the available grid and package dimensions.

What size drawer do I need for cling film rolls?

Measure the longest box you want to store and compare it with the drawer's internal dimensions and the current module specifications. Do not infer the required length from the drawer width alone.

Can I keep cling film and foil in the same section?

That depends on the packages and module selected. Compare their combined dimensions with the current product details instead of assuming that one section will suit both.

Where do I keep food bags and sandwich bags?

Keep them in the packaging or containers required by their manufacturers. Measure those packages and arrange them in the drawer according to your own routine and the available grid.

Build your wrap drawer, or browse kitchen modules

Two paths from here. Build your own wrap drawer fit by entering the drawer's internal length and width and testing available modules. Or browse kitchen drawer organisers.

Risk-free trial — change or return any module, anytime.

Previous Post Next Post